Not So Loud Mod!

[mitchbelcourt]

Well out of desperation, due to my drill not being powerful enough to push my holesaw through my resonators, I drilled 4, 3/8 holes, in the end of each pipe. The sound is actually pretty awesome, not as loud as totally removing them but definately an improvement. I will remove mine as soon as I can get a drill will some balls but untill then this will suffice.

[AirportFF]

Mitch, what kind of drill are you using? Hopefully not a cordless they don't have the torque to spin that holesaw very long.

If you're using a regular drill. Remember, let the tool do the work. Don't put too much pressure on the saw. It'll just burn out the drill. A little cutting oil wouldn't hurt either.

[mitchbelcourt]

Ya it's just a 9.6v cordless POS! I knew it wouldn't push through but had to give it a shot anyways. I will find or buy a drill soon and finish the job probably just in time to get a set of Burbs!!

[AirportFF]

That's always the way...you should check in with Smokeshowin. I think it took him 4 days to get through his.

[Galager]

Make sure you get a 1/2 inch drill. The 3/8 I had burned out, but I also didn't really care. It will take 1/4 the time with the 1/2 drill and it won't burn out.

[mitchbelcourt]

Make sure you get a 1/2 inch drill. The 3/8 I had burned out, but I also didn't really care. It will take 1/4 the time with the 1/2 drill and it won't burn out.

Thanks! Will do!