FS: CBR Rear Wheel Setup

[Corpsegrinder]

I have a CBR rear setup that I'm looking to get rid of. Its an aluminum rim that has been chromed. It also comes with the sprocket and caliper. The tire is a 210 mm metzler with less then 2000 miles.

Between the tire, the price of the rim, price to have it chromed, the rotor and the caliper, There is well over $600 into this setup.

You would need to find a master cylinder. The master cylinders sell on ebay for about $20. The bearings are setup for the stock axle. You can use your stock spacer for the chain side and the caliper is the spacer for the other.

I'd let it gor for $450 plus shipping. If you are interested, you can hit me at joonyasmom@aol.com

Here is a pic of it.

http://pic18.picturetrail.com/VOL867/3161308/6439421/220852437.jpg

[MISpiritRider]

As soon as I get my taxes back (2-9-07 or so) and I get my credit card paid off, I'll give you a jingle. If someone nabs it before then, so be it...

Thanks Corpse!

:grin3:

[Corpsegrinder]

As soon as I get my taxes back (2-9-07 or so) and I get my credit card paid off, I'll give you a jingle. If someone nabs it before then, so be it...

Thanks Corpse!

:grin3:

Sounds good man.

[Mad Tailor]

I have a CBR rear setup that I'm looking to get rid of. Its an aluminum rim that has been chromed. It also comes with the sprocket and caliper. The tire is a 210 mm metzler with less then 2000 miles.

Between the tire, the price of the rim, price to have it chromed, the rotor and the caliper, There is well over $600 into this setup.

You would need to find a master cylinder. The master cylinders sell on ebay for about $20. The bearings are setup for the stock axle. You can use your stock spacer for the chain side and the caliper is the spacer for the other.

I'd let it gor for $450 plus shipping. If you are interested, you can hit me at joonyasmom@aol.com

Here is a pic of it.

210 nice. I was just looking for the right rim so I can mod the back before bolting the new fender and here you are, but the wrong rim. Price is great dough. I wish it was classic spoke rim...............
Did you get the tints from the paint?

http://i176.photobucket.com/albums/w166/bombeff/Picture-4.jpg

[Corpsegrinder]

Hey MT,

Sorry I didn't reply to you sooner but ShdowRiders doesn't notify me of new posts for some odd reason.

If your after a spoked rim, I would do the harley setup. Compared to others, for a spoke setup its the best bang for the money. Its wider then the VTX setup and you can have a disk brake setup too. If I woulda never ran into the deal I got for my back wheel, I would of never did a custom relace. Its too damn expensive.

If your interested in doing the harley setup and need some help, you know how to find me.

Later bud.



210 nice. I was just looking for the right rim so I can mod the back before bolting the new fender and here you are, but the wrong rim. Price is great dough. I wish it was classic spoke rim...............
Did you get the tints from the paint?

http://i176.photobucket.com/albums/w166/bombeff/Picture-4.jpg

[Mad Tailor]

Hey MT,

Sorry I didn't reply to you sooner but ShdowRiders doesn't notify me of new posts for some odd reason.

If your after a spoked rim, I would do the harley setup. Compared to others, for a spoke setup its the best bang for the money. Its wider then the VTX setup and you can have a disk brake setup too. If I woulda never ran into the deal I got for my back wheel, I would of never did a custom relace. Its too damn expensive.

If your interested in doing the harley setup and need some help, you know how to find me.

Later bud.
Sound good, I have hard time matching the parts and sizing. But with some help mechanicly I'm OK. So you got part # and places to get them I'm up for it .

Cheeres

[bigarmzz]

this the same one ya got off snyderman a few months back?

[Corpsegrinder]

this the same one ya got off snyderman a few months back?

Nope. Different setup. I still have that one too.

[MISpiritRider]

Hey corpse, do you by chance have a pic of that mounted, or did you never get that far? I sorta like the cbr wheel that ickmak has, a few more spokes to the mag.

[Corpsegrinder]

Hey corpse, do you by chance have a pic of that mounted, or did you never get that far? I sorta like the cbr wheel that ickmak has, a few more spokes to the mag.

I'll see if i can find a pic. gimmie a sec

[MISpiritRider]

K, I'll be back on later...

Thanks

[TommyBoy]

Hey MT,

Sorry I didn't reply to you sooner but ShdowRiders doesn't notify me of new posts for some odd reason.

If your after a spoked rim, I would do the harley setup. Compared to others, for a spoke setup its the best bang for the money. Its wider then the VTX setup and you can have a disk brake setup too. If I woulda never ran into the deal I got for my back wheel, I would of never did a custom relace. Its too damn expensive.

If your interested in doing the harley setup and need some help, you know how to find me.

Later bud.

What did that relace cost you? What rim size did you go with? I've been kicking that around myself, but wasn't sure of the total cost. Buchcanan doesn't carry steel rims anymore, so I would have to polish the aluminum and get new spokes. I can get the relace and mount done for free. Going with a Harley setup leaves me buying new forward controls, wheel, and rotar. Not sure which way to go.

[Purpitrator]

What did that relace cost you? What rim size did you go with? I've been kicking that around myself, but wasn't sure of the total cost. Buchcanan doesn't carry steel rims anymore, so I would have to polish the aluminum and get new spokes. I can get the relace and mount done for free. Going with a Harley setup leaves me buying new forward controls, wheel, and rotar. Not sure which way to go. Did you not just answer your own question?????

[TommyBoy]

Did you not just answer your own question????? The question was what was the cost of the relace and what size did he go with? Not sure what answer you you saw in that message, but thanks for the input. There were some thoughts about additional costs of going with a relace or a Harley wheel .

If you have the answers to the questions I would appreciate it from you also.

[bigarmzz]

The question was what was the cost of the relace and what size did he go with? Not sure what answer you you saw in that message, but thanks for the input. There were some thoughts about additional costs of going with a relace or a Harley wheel .

If you have the answers to the questions I would appreciate it from you also.


just get a vtx mod...its cheaper/easier/looks killer


nice tricycle....pffttttt...noobs:freak:

[digees]

I would like to see a pic of it mounted up on the bike also. Might be interested in buying it...

[Corpsegrinder]

What did that relace cost you? What rim size did you go with? I've been kicking that around myself, but wasn't sure of the total cost. Buchcanan doesn't carry steel rims anymore, so I would have to polish the aluminum and get new spokes. I can get the relace and mount done for free. Going with a Harley setup leaves me buying new forward controls, wheel, and rotar. Not sure which way to go.

Its a 5.5 x 18 stainless rim. I bought it from Bigarmz so I saved a few bucks. The wheel wasn't done at buchanons though. www.blackbikewheels.com did the work.

Cost factor, If I didnt run into such a sweet deal, I would do the Harley Setup. Its cheaper (if you shop around) plus your getting rid of the drum brake. The only downer is if your not mechanically inclined, this is a tough mod.

[TommyBoy]

just get a vtx mod...its cheaper/easier/looks killer


nice tricycle....pffttttt...noobs:freak:

I already have the VTX mod, and it is a great improvement over stock, but still not exactly what I want. I have a friend finishing the Harley Tech school here. I can get the actual relace and wheel trued for free it I do it before the semester ends. I guess my cost will be in getting the rim(s) drilled, spokes, and tire(s). I guess If I go with aluminum I can polish them myself.

I don't know.

[TommyBoy]

Its a 5.5 x 18 stainless rim. I bought it from Bigarmz so I saved a few bucks. The wheel wasn't done at buchanons though. www.blackbikewheels.com (http://www.blackbikewheels.com) did the work.

Cost factor, If I didnt run into such a sweet deal, I would do the Harley Setup. Its cheaper (if you shop around) plus your getting rid of the drum brake. The only downer is if your not mechanically inclined, this is a tough mod.

I'm kind of at the sweet deal junction myself. I am mechanical, but there are alot of cost either way. Tires, spokes, and rims for a relace, Tires, wheels, different forwards, brake discs, and a caliper for the swap.

I have a friend that can lace, true and mount for free. I guess I can find a rear drum to start with and sell my VTX modded wheel and tire, maybe even my Mapams if I swap.
I don't know... I'm sure either way it is a pretty nice chunk of change.

Thanks for the link black bike wheels, I will check it out.

[Galager]

Back to your wheel for sale...I know I need a master cylinder for that disc brake, what other mods would I have to do to my bike in order to make that fit? Is there a front wheel to match?

[Corpsegrinder]

Back to your wheel for sale...I know I need a master cylinder for that disc brake, what other mods would I have to do to my bike in order to make that fit? Is there a front wheel to match?


All you would have to do with this wheel is get a master cylinder, get a brake line and either weld a brake say to your swing arm or you can bolt it to your swing arm like my buddy has done.

There is a matching wheel but I'm pretty sure it 's a 17''.

Heres a pic of a guy who has this wheel and found an aftermarket 21'' wheel to match. I think he did an excellent job.

http://www.meancycles.com/owners/cd_god/5484/bikecol2.jpg

[MISpiritRider]

Hey Corpse empty your mail box!

Sorry it's taken so long, money should be sending out tomorrow morning. I'm setting a day aside this week to do my banking!

[Galager]

Hey Corpse empty your mail box!

Sorry it's taken so long, money should be sending out tomorrow morning. I'm setting a day aside this week to do my banking!


Sounds like its spoken for anyway. Thanks...

[MISpiritRider]

corpse your mail box is still full!!!!

I sent out the Money Order today. You should get it this week. PM me before you ship it out, would ya?

thanks!

[Corpsegrinder]

corpse your mail box is still full!!!!

I sent out the Money Order today. You should get it this week. PM me before you ship it out, would ya?

thanks!

Cool. Sounds good man. Sorry about the full mailbox. I'm gonna go delete some of it now.

[MISpiritRider]

The wheel came in last week, it sure is purty! I was going to black it out, I think I'm gonna have a tough time doing that the chrome is so nice!

Thanks again corpse!

Now if I catch up on my to do list, I'll start moddin my bike again....:thumbsup:

[Dbonezny]

i've been going thru hell w/my swap......just saying

[MISpiritRider]

I plan on making it a bit more complicated than a straight swap too...

We'll see how it goes!:bomb:

[Dbonezny]

I plan on making it a bit more complicated than a straight swap too...

We'll see how it goes!:bomb:

Your plan will be full proof...I PROMISE!!!

[MISpiritRider]

Awesome! I want to try to find a master cylinder big enough I can run some type of proportioning valve and run front and rear brakes with just the pedal - clean up the bars of another lever. And I still want to do a jockey shift with the clutch on the shift arm.

[Corpsegrinder]

The wheel came in last week, it sure is purty! I was going to black it out, I think I'm gonna have a tough time doing that the chrome is so nice!

Thanks again corpse!

Now if I catch up on my to do list, I'll start moddin my bike again....:thumbsup:

Damn, sorry for the dealy. Shadowriders doesn't notify me of responses in threads.

Cool. Im glad you got it.

Black it out? That would be a shame to black out that chrome. From what I heard that wheel was a motherfucker to prep for chroming.

Post some pics when you get er on there! :)

[halvy]

yah i agree keep it chrome

then you can just look for a kick ass front like that other guy did that looked pretty sweet

[03redss]

Is The Rim And Caliper Setup Still For Sale

[MISpiritRider]

:crazy3: NOPE! :crazy3:

[customchevy22]

thats my new set up on the yellow bike , just bought the front and rear set up from him, should have it on the 7th of may, can't wait!

[Corpsegrinder]

:crazy3: NOPE! :crazy3:

hahahaha

[MISpiritRider]

thats my new set up on the yellow bike , just bought the front and rear set up from him, should have it on the 7th of may, can't wait!

From who? I bought this CBR rear setup...

[customchevy22]

Josh who goes under cd god!

[customchevy22]

and I believe I have your old ace fork covers! got them off Dale(deespeed) off the spirit world.

[customchevy22]

this guy had like three sets of these cbr wheels chromed, but I purchase the front wheel also! Already have the tracking number should be hear on Monday!

[MISpiritRider]

not mine...:huh:

[customchevy22]

what do you mean not yours? where you suppose to buy this set or what? I had to send him my front axle so that he can put his factory wheel back on!

[MISpiritRider]

Who's fork covers were you talking about now? I didn't have any or sell any.

I think you're getting yourself confused! :heh_heh:

[customchevy22]

I meant that for corpsegrinder! The guy I bought them from told me they were corpse's old set is all!

[MISpiritRider]

Sweet!

[Corpsegrinder]

I meant that for corpsegrinder! The guy I bought them from told me they were corpse's old set is all!

Yep I saw you bought my old covers off of Dale.

[customchevy22]

yeah, just waiting for the little extra's I need to install them to come in from servicehonda.com

[Corpsegrinder]

yeah, just waiting for the little extra's I need to install them to come in from servicehonda.com
I talked to Dale. He was askin me about the bungs and O-rings. I have another set of O-rings. I didn't use them. The bungs are a must though. I hope they are still in good condition. They were sweet when I sold em.

Heres a pic of them from last year with the signals mounted.

http://pic18.picturetrail.com/VOL867/3161308/6439421/163737089.jpg

[customchevy22]

kick ass bike man, one of the nices i have seen, and the fork covers seems to be in good condition, yeah he gave me two part numbers, I ordered two of each, just waiting for them to come in! Come a long way on my bike for just having it two months, just need the wheels to complete it for now , at least this yr or when winter comes around. Where did you get the lights, they have the side of the covers drilled for lights but going to need some to put there, right now have changed my back lights but not the front.

[Corpsegrinder]

kick ass bike man, one of the nices i have seen, and the fork covers seems to be in good condition, yeah he gave me two part numbers, I ordered two of each, just waiting for them to come in! Come a long way on my bike for just having it two months, just need the wheels to complete it for now , at least this yr or when winter comes around. Where did you get the lights, they have the side of the covers drilled for lights but going to need some to put there, right now have changed my back lights but not the front.

I had kuryakyn halogen silver bullets. I had to cut the length of the kury bolt down and ran the wire out of the seem in the back of the upper cover.

[customchevy22]

got the covers put on today man looks sweet just need to get the signal lights asap! looks sweet man!