New Blinkers/Tag Mount

[Purpitrator]

I recently installed a set of flush mount blinkers and made my own side mount tag bracket out of .040 aluminum sheeting. I used the factory tag light as well. I will more than likely buy a steel tag bracket on down the road because I can already tell (without a test ride) that this one is going to shake quite a bit. Here a some pictures......I know the pics suck. Thats why I am NOT a professional photographer.
2970
2971
2972

[mark v]

Lookin good!

[dakota99rt]

are those trailer marker lights from a truck stop?

[Purpitrator]

NO!!!! They are flush mount blinkers for the crotch rockets.

[dakota99rt]

wasnt trying to put down your bike purp. I think they look good. but they look alot like some of the new LED trailer marker lights Ive been seeing on some of the new trailers.

[Purpitrator]

wasnt trying to put down your bike purp. I think they look good. but they look alot like some of the new LED trailer marker lights Ive been seeing on some of the new trailers. I know. Honestly, it doesnt look as good to me as I had hoped. I thought these blinkers were actually a little smaller. Wouldn't you know it though. I was searching ebay one week after getting those in and found another pair of flush mount blinkers that were smaller in size. Oh well it does look better than stock right?

[jajara]

I know. Honestly, it doesnt look as good to me as I had hoped. I thought these blinkers were actually a little smaller. Wouldn't you know it though. I was searching ebay one week after getting those in and found another pair of flush mount blinkers that were smaller in size. Oh well it does look better than stock right?

Jeez guy, the side mout great job, compliments, but the blinkers, those are some big motherfuckers.:thumbsup:

[Purpitrator]

They are smaller than stock homeboy!
I am actually going to redo the tag mount bracket. The one on there is basically just a prototype. I am going to use aluminum tread/diamond plate for the end product. Thanks for the comps though.

[jajara]

Look
http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/G_13409G_SW_1.gif (javascript:void(0))15.99



or

http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/G_13510G_TH_1.gif;pvcadcb1a4d3376ec7 (http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2003510/c-10111/Nty-1/p-2003510/Ntx-mode+matchallpartial/N-10111/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=bullet+mini+signal+lights)24.99

Try this @ jcwhitney.com

I have 2 pairs of the ones 24.99 they are not that big and they look good.

[Purpitrator]

Look
http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/G_13409G_SW_1.gif (http://javascript<b></b>:void(0))15.99



or

http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/G_13510G_TH_1.gif;pvcadcb1a4d3376ec7 (http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2003510/c-10111/Nty-1/p-2003510/Ntx-mode+matchallpartial/N-10111/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=bullet+mini+signal+lights)24.99

Try this @ jcwhitney.com

I have 2 pairs of the ones 24.99 they are not that big and they look good. So is that YOUR VTX that is sitting in my garage? If so then I would have asked you personally which blinkers I should have bought.

[jajara]

So is that YOUR VTX that is sitting in my garage? If so then I would have asked you personally which blinkers I should have bought.
I slightly forget why am i always thinking that you are an ASS.
Well thanks for reminding me, DURP.
You idiot, you post a thread and want opinion, and when someone is honest, you want to piss on them, so, DURP, fuck you and you VTX, now you are on my IGNORE list, you idiot,.

[Purpitrator]

I recently installed a set of flush mount blinkers and made my own side mount tag bracket out of .040 aluminum sheeting. I used the factory tag light as well. I will more than likely buy a steel tag bracket on down the road because I can already tell (without a test ride) that this one is going to shake quite a bit. Here a some pictures......I know the pics suck. Thats why I am NOT a professional photographer.
2970
2971
2972I don't remember asking for an opinion here. I just wrote down what I did to MY bike. Then you came in talking shit about MY blinkers on MY bike. So jajara, you can call me names all you want. I really don't care. :drink:

[Purpitrator]

I recently installed a set of flush mount blinkers and made my own side mount tag bracket out of .040 aluminum sheeting. I used the factory tag light as well. I will more than likely buy a steel tag bracket on down the road because I can already tell (without a test ride) that this one is going to shake quite a bit. Here a some pictures......I know the pics suck. Thats why I am NOT a professional photographer.
2970
2971
2972
Where to start? Just an update to the above post. I re-did the tag mount bracket. The other was to flimsy. I used .125 aluminum tread/diamond plate this time. Very sturdy and different compared to the plain old smooth back of the others. I am NOT going to use the factory tag light. Instead I am planning on ordering a chrome tag cover with a LED strip built in. See below... I will post some better pictures when complete.
http://www.customdynamics.com/Images/3illumin_frame.jpg

[rebelred]

lol...jarjar.....will never learn will he

[Purpitrator]

Nope!!!!!!

[Corpsegrinder]

Where to start? Just an update to the above post. I re-did the tag mount bracket. The other was to flimsy. I used .125 aluminum tread/diamond plate this time. Very sturdy and different compared to the plain old smooth back of the others. I am NOT going to use the factory tag light. Instead I am planning on ordering a chrome tag cover with a LED strip built in. See below... I will post some better pictures when complete.
http://www.customdynamics.com/Images/3illumin_frame.jpg

Hey man, If you buy anything from Signal Dynamics or Radiantz, I can hook you up with a guy who is a dealer for them. He's very responsive, very helpfull and will beat any of those prices you see on there website. Lemme know if you want his addy.

[Corpsegrinder]

I know. Honestly, it doesnt look as good to me as I had hoped. I thought these blinkers were actually a little smaller. Wouldn't you know it though. I was searching ebay one week after getting those in and found another pair of flush mount blinkers that were smaller in size. Oh well it does look better than stock right?
What has always helped me is if you look on these companies websites most of them dont advertise half of what they sell. Anytime I see free catalogs. I order them. I just got the new Dennis Kirk catalog and the thing is the size of a phonebook. They had quite a few things in the catalog that I hadn't seen on there site.

A few companies that offer free catalogs off the top of my head are.

JPCycles
DennisKirk
Jireh Cycles

It always good to exagerate all your options before you purchase. The sigs and sidemount look perty good though.

[jajara]

lol...jarjar.....will never learn will he

Dude, where have you been, about the purp he put the thread and i said my opinion, not in the bad way, but he stratd atacking, what is there to learn?
If someone does not like opinions they should not post threads, am i right?

[Purpitrator]

Hey man, If you buy anything from Signal Dynamics or Radiantz, I can hook you up with a guy who is a dealer for them. He's very responsive, very helpfull and will beat any of those prices you see on there website. Lemme know if you want his addy.Awsome Corpse, If you could send me that addy cuz I plan on ordering the license plate cover I posted so I don't have to use a big gawdy taglight.

[Corpsegrinder]

Awsome Corpse, If you could send me that addy cuz I plan on ordering the license plate cover I posted so I don't have to use a big gawdy taglight.

Heres his email addy. His name is Chad. Good guy and very helpful.

chohenwarter@netzero.net (javascript:parent.ComposeTo('chohenwarter@netzero.net', '');)

[Purpitrator]

Heres his email addy. His name is Chad. Good guy and very helpful.

chohenwarter@netzero.netThanks man. Who should I tell him referred me?