My 95 Shadow ACE C2 1100 work so far....

[ACE-Rider]

As bought...(less bags & windshield)

http://img158.imageshack.us/img158/9105/picture071mf9.jpg

After I cut up the fenders...



http://img525.imageshack.us/img525/37/picture170zx9.jpg

The new bars...

http://img503.imageshack.us/img503/5971/picture246sw7.jpg

http://img104.imageshack.us/img104/5493/picture247qa7.jpg

New paint and seat is next...

[MISpiritRider]

Hell ya Chuck! Nice bars by the way!

[dirtwarrior]

nice

[miclash1]

chuck,,,,

nice bike brother............... u did good on the bars, and i like the new look on the fender.

[ACE-Rider]

Thanks ... I'll get some more pic's of the bars when I can get it outside and either not be dark or snow/rain!!

[mace69]

Nice ACE.

[ACE-Rider]

Better pic's of the bars sinse it was nice out!!

http://img170.imageshack.us/img170/8999/picture268dq2.jpg

http://img297.imageshack.us/img297/9623/picture267ph8.jpg

http://img297.imageshack.us/img297/3280/picture266ec0.jpg

[Purpitrator]

I'd be slammin the ass end of that sucker.....but she looks good.

[ACE-Rider]

I'd be slammin the ass end of that sucker.....but she looks good.

I've been looking for some progressives but nothing goes low enough without putting on struts....I can get a friend here at work to make some free for me but I don't know if my hemroid ass can take a strut!! Paint, new seat and bullet lights is next...

here is the seat, and trust me, there isn't many that'll fit my bike!!

http://img356.imageshack.us/img356/2674/75809lgdn2.jpg

[california69gs]

Nicely Done! That'll make a nice rooster tail now!

What are your plans for brake light action and L.Plate display?

I just got myself an extra set of tins to cut down, but I've been to chicken to try it yet cuz I'm not even sure what I want it to look like.

What did you use to make such a nice clean cut?

[miclash1]

ace,

what are u going to do with the taillight? r u going to put the original back on in the same spot, or are you doing a side mount. i think the original will look shitty with the new fender you have. bike's looking good bro!!!!!!

[ACE-Rider]

ace,

what are u going to do with the taillight? r u going to put the original back on in the same spot, or are you doing a side mount. i think the original will look shitty with the new fender you have. bike's looking good bro!!!!!!

Actually mic I was thinking of trying to fit a shadow750 cat eye on it!! If that don't work then I'll do the licence plate side bracket light combo.

[ACE-Rider]

Nicely Done! That'll make a nice rooster tail now!

What are your plans for brake light action and L.Plate display?

I just got myself an extra set of tins to cut down, but I've been to chicken to try it yet cuz I'm not even sure what I want it to look like.

What did you use to make such a nice clean cut?

I used a good Milwaukee jig saw, RAZOR did alot of cutting in his bike and used a drumel with a cut off wheel. Either one will work just make sure you measure it out good and tape it off.

[RAZOR]

THE BARS COMPLETELY CHANGED THE LOOK OF YOUR BIKE,, FOR THE BETTER..

:jamming::jamming:

[ACE-Rider]

THE BARS COMPLETELY CHANGED THE LOOK OF YOUR BIKE,, FOR THE BETTER..

:jamming::jamming:


I agree RAZOR, I really like the way they look and feel!! :grin:

[jrod1970]

your ACE looks SWEET!

nice job on the fenders :thumbsup:

the bars look cool too :thumbsup: :thumbsup:

[ACE-Rider]

your ACE looks SWEET!

nice job on the fenders :thumbsup:

the bars look cool too :thumbsup: :thumbsup:

Thanks jrod....I got alot of work to do this winter still!!

[miclash1]

your DICK looks SWEET!

nice job on the man boobs:thumbsup:

the ass look cool too :thumbsup: :thumbsup:


wtf

holy shit, thats some wierd shit if u ask me....:rolleyes3 :rolleyes3 :rolleyes3

[ACE-Rider]

wtf

holy shit, thats some wierd shit if u ask me....:rolleyes3 :rolleyes3 :rolleyes3


:lol: :lol: :lol: Fucknut sheephearder!!

[california69gs]

Well keep us up to date with pictures through winter as it progresses.

[ACE-Rider]

Well keep us up to date with pictures through winter as it progresses.

I sure will ca69 guy...I just talked to a friend and he's gonna spray it black for me here at work. Then I'm going to put one of these on... http://dawgscyclegrafix.com/

Then a toolmaker friend here is going to make me some struts!!

[ACE-Rider]

bump

[ACE-Rider]

bump

bump again until I get more fuckin work done!!

[california69gs]

Have you done anything more? Pics'?

[ACE-Rider]

Have you done anything more? Pics'?

Nope...haven't had time. I got people that's going to paint and make me some struts but haven't got everything off the bike yet.

[miclash1]

Nope...haven't had time. I got people that's going to paint and make me some struts but haven't got everything off the bike yet.

what color u going with, and what u doing for struts

[bchurch99]

Hey Ace how do you like your seat? that's the mustang gunfighter right? i just bought the same seat but haven't had a chance to ride yet...

file:///C:/DOCUME%7E1/ADMINI%7E1/LOCALS%7E1/Temp/moz-screenshot.jpgfile:///C:/DOCUME%7E1/ADMINI%7E1/LOCALS%7E1/Temp/moz-screenshot-1.jpg:drink:

[ACE-Rider]

Hey Ace how do you like your seat? that's the mustang gunfighter right? i just bought the same seat but haven't had a chance to ride yet...

file:///C:/DOCUME%7E1/ADMINI%7E1/LOCALS%7E1/Temp/moz-screenshot.jpgfile:///C:/DOCUME%7E1/ADMINI%7E1/LOCALS%7E1/Temp/moz-screenshot-1.jpg:drink:

Yup, mustang gunfighter and I don't know yet either, I haven't had a chance to get my ass in it yet!!

[ACE-Rider]

what color u going with, and what u doing for struts

Nothing special mic, I'm just going black with the custom graphics.

[ACE-Rider]

Nothing special mic, I'm just going black with the custom graphics.

Oh and the struts will be home made and I don't know what they'll look like until we start cutting'em.