any ideas to cover hole on rear fender???

[homero427]

i was thinking of a silver dollar tact(weld) to a bolt... heads up and tail down...
anyone has anything different?
only have about 1/2 inch clearance from fender to tire.

[Mr.Sinister]

I have a p pad that I can slap over the hole . I have thought about graffics but I can see that is probibly is not the route you would be going by the picture . You have already done the tank stretch so that means you have already repainted . It would have been easy to bondo or glass in the hole and paint it the same time as the tank . If you have some of the paint left you could cut a plug and paint it and JB weld it in the hole .

[croach1]

I have to agree with Mr. Sinister here. Plugging the hole with something the same paint color would look best. The bike has a clean look so just sticking something in the hole that doesn't keep that look would stick out like a sore thumb.

[cowboy]

they have chrome caps at the hadrware stores that just push in it is a flat chrome circle on top.

[homero427]

should of cover the during the painting, but forgot to tell the painter, actually remembered after the fact... :veryangry

here is a pic from rear...

[Mr.Sinister]

Do you have any of the material from the fender left over ? You could use it for a plug . Take it to your painter and see if he would do it . You have a very trick looking ride . Keep with the look , you have a winner .

[homero427]

thanks for the comps man,,,

i know where i can get some...

you at work? or just like me, at work bullshitting?lol,,,,
actually all the soldiers i'm training are in class, so i'm chilling for now...
hehehe..

[croach1]

I like the bike. I have to ask, is that a portable garage that the bike is sitting on?

[homero427]

it can be...
here is the address for it....
its awesome i likey,,,,easy to cover bike....
i put bike in shed during winter and fold the cycle shell put away too..


http://www.cycleshell.com/

[croach1]

That is great. Thanks for the info.

[Mr.Sinister]

I check in from work at night here in Or . And I dink around at home before I go to bed in the am . I usualy check back around 1800 pacific .

[typhoon]

hello all ? fist of all , i`m pretty new here. i`ve been riding my shadow spirit since 2000 and i have done some mods on it. 2.5 inc lowering kit,billski tail light and hypercharger .. i plug the hole on my rear finder with a 45 cal bullet shell and works pretty good. thanx all.

[M@Man]

Nobody has welcomed you properly...

FUCK OFF NOOB!
Welcome to the board.:luxhello:

That bullet trick sounds pretty cool lookin' got any pix?

M@

[Mr.Sinister]

M@ are you poaching my noobs in 750 country ? This aint classic Shadows . Just bustin your balls . :wink_2:

[M@Man]

M@ are you poaching my noobs in 750 country ? This aint classic Shadows . Just bustin your balls . :wink_2:

Hey, no one else was online at the time, what was I supposed to do?
I couldn't just let it go...I'm sick...I need help. :sick2:

Hi, my name is M@, and I'm a Noobaholic.
:lol: :lol: :lol: :lol:

M@

[AirportFF]

hello all ? fist of all , i`m pretty new here. i`ve been riding my shadow spirit since 2000 and i have done some mods on it. 2.5 inc lowering kit,billski tail light and hypercharger .. i plug the hole on my rear finder with a 45 cal bullet shell and works pretty good. thanx all.


That's a pretty slick idea. I've heard of some folks that find a belt buckle or some other trinker that they like and mount that there.


A giant butt plug would look interesting............ :no:

[SmokeShowin]

A giant butt plug would look interesting............ :no:

Hmmm...Didn't Lisa just get a bike?!?! :crazy3:

[halvy]

does the 45 cal bullet fit in there snug or is it loose? if loose then how do i conect it so it dont come out?

[Mr.Sinister]

does the 45 cal bullet fit in there snug or is it loose? if loose then how do i conect it so it dont come out?
JB weld.

[nomad]

I actually put a whole .50 cal round in the hole. Fits perfect , heres a pic where you can see it, but it looks better than this shows.
http://img386.imageshack.us/img386/6311/picture0157fk.jpg

[halvy]

i see!! i am thinking of putting the butt of the caseing in the whole and going with a silver bullet theme for the bike because i do a lot of target shooting. what do you guys think?