New setup...

[nibs75]

I decided I didn't like the setup the stealer did, and wanted to do it myself. I went ahead and removed the entire snorkel, rejetted to the 136, clip on 2 notch, 2 turns out on the mixture screw. While I was at it I removed the rear fender, and looked at what it would take to relocate the rear turn signals. I've seen the mod that uses turnsignals off a 600, but wanted to see if there was a way to use the stock ones (I'm cheap). They just aren't long enough to stick out past the tag if mounted to the tag bracket. I went ahead and put it back together for now. I am considering making templates of each side of the fender then locating the lights and transferring the spot to the rear fender... but I'm a little nervous to drill the fender. I think I wait until fall to tackle that.. Anyway, heres some pix of the bike with the fender, tank, and seat off, as well as the bike when it was stock.

http://s72.photobucket.com/albums/i172/nibs75/My_Aero/
:jamming::jamming::jamming::jamming::jamming::jamming: