Jets

[Partsguy198]

No, not the football team. Anybody know where I can locate jets for an 06 SS750? Factory Pro doesn't offer anything. Dynojet/Cobra (same shit) only offer a stage 1. I need a stage 2, pipes and intake.

[AirportFF]

Here's a hint, just so you know.



General Discussion= General Discussion


Jets= Bike Discussion
You'll get better info and hopefully less bullshit if you post a question in the appropriate area

[RAZOR]

If You Changine The Pipes And Intake
You Need The Factory Pro 136 Front 138 Rear And 42 Slow Jets.

There Is No Difference In The Carbs On The Ss750.

[Partsguy198]

If You Changine The Pipes And Intake
You Need The Factory Pro 136 Front 138 Rear And 42 Slow Jets.

There Is No Difference In The Carbs On The Ss750.

So, I get the 3.0 kit and that'll work even though the FP site says different?

[RAZOR]

So, I get the 3.0 kit and that'll work even though the FP site says different?
I DONT THINK THEY OFFER IT FOR AN 2006 CUZ ITS TOO NEW.
WHAT KINDA PIPES? BAFFLES OR NO BAFFLES.
WHAT MOD ARE YOU DOING TO THE INTAKE?
NEED SOME MORE INFO.....

[Partsguy198]

Cobra Streetrod Slashdown, Thunder round air kit. FP doesn't go past 04 on there site. It says they need an 05 bike to test kits.

[RAZOR]

Engine Type 745cc liquid-cooled 52-degree V-twin
Bore and Stroke 79.0mm x 76.0mm
Compression Ratio 9.0:1
Valve Train SOHC; three valves per cylinder
Carburetion Two 34mm diaphragm-type CV
Ignition CD with electronic advance, two spark plugs per cyl

THATS FOR THE 2006---AND MY 2003 IS THE SAME,NOTHING AS FAR AS I KNOW HAS CHANGED. SAME CARBS.
YOU NEED THE STAGE 3 KIT.CALL THEM TELL THEM TO GIVE YOU THE 04 STAGE 3
JET KIT.
OR YOU COULD BY THE JETS INDIVIDUALY FROM FACTORY PRO.CHEAPER.

BUT IF YOU HAVE NOT DID A REJET YET, YOU NEED TO GET THE KIT.
YOU NEED THE NEEDLES. SET THEM ON 3RD CLIP FROM THE TOP.
DONT FORGET TO ADJUST THE MIXTURE SCREWS.


BUT IF YOU WANT I SECOND OPINION HANGE TIGHT AND I'M SURE SOMBODY ELSE
WOULD CHIME IN.

[Partsguy198]

Thanks for your help.

[RAZOR]

Thanks for your help.
NO PROBLEM

[RustyJake]

If you want a quick confirmation, check with your stealer on the part numbers for the carbs on the previous year, and then the part number on yours. They'll be able to tell you if they are the same. I can't see them changing anything on them, been the same for a while now.