New year- new mods...

[BlackWidow Rider]

this time a 11 mod- only a small one, bike was lill' bit crashed last year, the owner is now on duty in fu* A*stan and he left me the bike to fix during his service over there.

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/008%7E0.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/009%7E0.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/010%7E0.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/011%7E0.jpg

some minor scratches at mirror, handlever, and exhaust

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/013%7E0.jpg

big dent in tank

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/012%7E1.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0237.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0237.jpg)

first, raw cutting of rear fender

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0239.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0239.jpg)

new turn sigs rear

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0241.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0241.jpg)

and front

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0240.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0240.jpg)

to be continued....

[BlackWidow Rider]

Made a sheetmetal piece for rear ligt and number plate

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0260_Kopie.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0261.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0261.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0262.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0262.jpg)

to get the plate more steep than the fender is

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0267.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0267.jpg)

german law...not more than 30° off the vertikal line

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0269.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0269.jpg)

[Fastang06]

Not bad! Keep the pics coming!

[obnoxious bastard]

sweet

[BlackWidow Rider]

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0282.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0282.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0283.jpg

maybe gettin lill bit lower ???

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0284.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0284.jpg)

[BlackWidow Rider]

paralell to the vt 11 i am doin a v-star...gettin some bigger rim in...

if you want to see some more pics of my bike work ??

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/Vergleich_1.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/Vergleich_1.jpg)

from 3,5 with 150 to 7 with 210

you have to change everything, swingarm, fender, fender subframe...but its the work worth i think- looks much better wit the lill bigger tire

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0279.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0279.jpg)

widening the stock fender

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0280.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0281.jpg

the last 3 months, after my spine surgery, i wasnt too busy with bikes, but i moved my garage from 60 m² before to a new place- only 25m from my home- to about 300 m² .....was a lot of work, doin all new elektrik air aso...from here :

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/Juli__2%7E1.jpg

and

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/Juli__3%7E1.jpg

to

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0112.jpg

to

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0202.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0202.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0203.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0203.jpg)

we made a party for new year in the new place

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0205.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0205.jpg)

[BlackWidow Rider]

some old airbrush things -long time ago

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0242.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0242.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0243.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0243.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0244.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0244.jpg)

[03ACE]

Nice new place! Great work, too.

[TI 3VOM]

Killer work, that plate sucks ass though, way to friggen' big to ever look good. But , what are you going to do??

Place sure looks nice with the white tile.

[BlackWidow Rider]

sorry, but german law sucks sometimes...minimum size for plates is 20x22 cm- no smaller allowed....

[gb6049]

Nice new place Tom. Have you posted the address on your website yet? As soon as weather permits, I still want to ride down to your place and visit.

[BlackWidow Rider]

still the same adress- it is only 50m from the old shop... ;-)

[gb6049]

still the same adress- it is only 50m from the old shop... ;-)

Excellent! I just ordered new brake lines yesterday, one to replace the rear line that I broke on my last ride in late October up near Darnstadt and I figured I may as well replace the original stock line on the front along with the original brake fluid.

The wife and I have driven down in the car a couple of times to the Altstadt and Schloss. Looks like some great areas to ride. I look forward to getting down there on the bike.

[gb6049]

still the same adress- it is only 50m from the old shop... ;-)

Excellent! I just ordered new brake lines yesterday, one to replace the rear line that I broke on my last ride in late October up near Darnstadt and I figured I may as well replace the original stock line on the front along with the original brake fluid.

The wife and I have driven down in the car a couple of times to the Altstadt and Schloss. Looks like some great areas to ride. I look forward to getting down there on the bike.

[LannyNguyen]

German engineering, have been great. lol

But progress looks A+++!
Can't wait on how the finished project would look like.

[BlackWidow Rider]

finished...

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0462.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0462.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0463.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0471.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0471.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0472.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0472.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0473.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0473.jpg)

everything made with the stock fender

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0477.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0477.jpg)

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0475.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0476.jpg

think looks pretty cool, for a low budget mod....??

[gb6049]

Looks good but think the rear needs to come down some amd unless he is carrying a pillon, a solo seat. I hate the way mine looks when I add the spousal accessories (Mustang seat and sissy bar).

How the weather getting to be down there? Took a quick ride on Sunday to see how the new break mount worked. Still working on getting all the air out ofmthe rear break system. I think I have just about got it with thue use of a coworkers mityvac.

[BlackWidow Rider]

today weather was great...around 15° and sunny whole day.....


http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0486.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0486.jpg)

but forecast says rain aso next days maybe...so we wait lill bit longer for spring..

[BlackWidow Rider]

an other project....2 vt 750 ss

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0514.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0514.jpg)

denn sie wollen sich liften lassen

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0515.jpg (http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0515.jpg)

made a solo seat and some new mufflers and a small led taillight

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0672.jpg

chopped the rear and front fender

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0676.jpg

and stretched the tank

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0702.jpg

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0703.jpg

und schön an den Sitz angepasst

http://www.heidelbergcountychoppers.com/coppermine/albums/userpics/10003/DSCN0704.jpg

[Fastang06]

Looks sweet!!!!