View Full Version : Outside Links for Carb Help
RustyJake
01-31-2006, 09:30 PM
Seems a lot of people look for information on Carbs and how to set them up. Figured we might as well have a thread where people can find links to sites and information in regards to setting things up
Jetting Rules of Thumb (http://www.motorcyclecarbs.com/Default_W43.cfm)
Carbs101 (http://www.motorcyclecarbs.com/carbs101.pdf)
Reading Plugs (http://www.motorcyclecarbs.com/Plugreadings_W44.cfm)
Mikuni Tips (http://www.mikuni.com/fs-tuning_guide.html)
I'm sure there is a lot more information out there and hopefully this thread will get added to so it's easier for everyone to find.
AirportFF
01-31-2006, 09:59 PM
Seems a lot of people look for information on Carbs and how to set them up. Figured we might as well have a thread where people can find links to sites and information in regards to setting things up
Jetting Rules of Thumb (http://www.motorcyclecarbs.com/Default_W43.cfm)
Carbs101 (http://www.motorcyclecarbs.com/carbs101.pdf)
Reading Plugs (http://www.motorcyclecarbs.com/Plugreadings_W44.cfm)
Mikuni Tips (http://www.mikuni.com/fs-tuning_guide.html)
I'm sure there is a lot more information out there and hopefully this thread will get added to so it's easier for everyone to find.
Look at you...wielding the mighty sword of the moderator:grin3:
RAZOR
02-01-2006, 09:49 AM
:jamming: VERY GOOD INFO---
BB494
08-24-2006, 11:32 PM
THERE USED TO BE SOME GOOD INFO HERE www.sudco.com (http://www.sudco.com)
some info available at http://www.sa750.com
hotlinking to the appropriate page removes menus in some browsers. Click the menus at the left until you see some talking about jetting.
(http://www.sa750.com)
miodowj
07-24-2008, 02:47 PM
ty will be most helpful :-)
billace
12-23-2008, 08:07 AM
heeeyyyyy, jaaaack whyyyy don't you just fuck-off!!!!!!! quit spamming here nobody gives a shit about your stuff.
wissco750
12-26-2008, 05:24 PM
This is a site I used for my ss750, the bike being jetted is a ss 1100, but they're close enough. http://www.pegmonkey.com/node/575
GigaS27
05-20-2009, 09:12 PM
2 good links to understanding carb parts and how to tune:
http://www.dansmc.com/carbs2.htm
http://www.motorcyclecruiser.com/tech/motorcycle_jet_kits_carburetion/index.html
1st link = Explains the difference in needles.
2nd link = How to fine turn each throttle position.
txfirefighter343
01-02-2011, 07:42 PM
thanks for these they are very helpful
vBulletin v3.5.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.