Coil Bracket

[Distruptured]

Just finished putting together this coil bracket and was wanting some opinion as to what you all thought?
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10294
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10295
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10296
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10297
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10298
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10299

[mcvierh]

Just finished putting together this coil bracket and was wanting some opinion as to what you all thought?

About what???

[firefighter212]

must be the new and approved invisible coil bracket.lol

[mcvierh]

Just finished putting together this coil bracket and was wanting some opinion as to what you all thought?
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10294
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10295
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10296
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10297
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10298
http://www.shadowriders.net/forums/vbpgimage.php?do=full&p=10299

Can't miss it thats for sure....looks like it just might get in the way when it comes time for rejetting and A/F adjustments or cable adjustments.

[Distruptured]

It removes pretty fast and easy if adjustments are necessary and can’t see that being to frequent. And I thought it needed to be a decent size to cover up the un-sightly carb and it gives a good balance between the coil side and the stock 10 gallon air cleaner. I hope it will all pull together and if not, it'll get changed it's just metal and easy fab work. Thanks for the comment

[malhavic]

I like it nice idea. I also like your forward control set up. wicked

[worldblowmetour]

You have alot of good ideas bud

[Distruptured]

Thanks for the comps, I appreciate it. Most of the ideas come from this site and old chops n bobbs; just try’n to keep it simple and clean.

[Distruptured]

I just finished box'n the tunnel of this tank...long way to go before paint but I can start to see the light. The tank was off of a 1100 Sabre, I think. It has a better Bobber look from the side; little bit more of the tear drop look and was able to raise it about two inches. I am going to remove the original gas cap/bung and maybe weld in a Crime Scene Speedster gas cap. It should be crazy if nothing else.

10968

10969

10970

10971

10972

10973

10974

[firefighter212]

That`s def. different but looks like good work and cant wait to see it finished.

[slowc10]

them forward controls you made are killer

[malhavic]

You Got Skills Thats For Sure!

[Distruptured]

Hey thanks Slow, they only took me about 2 1/2 hrs to cut out. All in all I have about eight hours in them right now. All I lack is the linkage and to knurl some 1 3/8" alum. bar stock for the pegs.

[Distruptured]

Mal, I will send those templates out this weekend.

[Distruptured]

New CSC speedster weld in gas cap, another project for the weekend. The list keeps get'n longer and weekends get'n shorter and too few of um.

[malhavic]

Man! can't wait to see the finished product!
to bad you don't live near my neck of the woods.

[malhavic]

Mal, I will send those templates out this weekend.



my thanks go out to you sir!!!!

[Pecos]

So what's up? Got any new pics of your projects?

[09zkrankin]

i give you props man, looks like you do some good work. im going to guess that you are a machinist from the looks of your work and also you haveing the ability to knurl your own pegs an stuff? anyhow, lookin great

[slowc10]

got that email thanks

[Twisted member]

That gas cap is pretty cool, good work on the tank also , I have a coil bracket sitting in my basement some where almost like that its for an old harley thow , but I like how clean yours is , looks good on the bike ,

[Distruptured]

Thanks for the compliments guys. I haven’t done too much on the scoot in about a week and a half; been traveling for work. My rear Mohawk fender, Sparto Tailight and engine fins were sitting at the door when I arrived back home, so it should be interesting pretty soon. I ordered a custom springer seat from Rich Phillips Cycles; he puts together some bad ass solo's at a good price , it should be here this week and then I’ll mock up the whole rear. All I wanted to do was change out the stock tank for the 1100 Sabre tank and and all this shit started; I think it’s going to be a never ending process. Oh well it keeps the sanity

[moparmadness316]

Did you make this bracket or buy it? I am trying to find something exactly like this for my 86 VT700.