PDA

View Full Version : 750 spirit custom speedo dials

Shadow1100Guy
11-15-2005, 08:36 PM
Ok folks we now have custom speedo faces that fit the 05 spirit 750. If your dial looks like what we have then it will work. Check out our web site that has pics of the spirit face done. Make sure your idiot lightes match this one.
http://www.wholesalegoods.net/speedo/

See pic #6001 of 750 spirit.
pegscraper
12-13-2005, 11:52 AM
I've gotta say, these speedo faces are awsome looking once they are installed! They don't look very good until they are in but when you get it behind the glass and turn on your lights...... WOW! What a GREAT MOD!


Pegsishappywithhis!
Shadow1100Guy
12-13-2005, 12:32 PM
I've gotta say, these speedo faces are awsome looking once they are installed! They don't look very good until they are in but when you get it behind the glass and turn on your lights...... WOW! What a GREAT MOD!


Pegsishappywithhis!

Thanks. We do our best to make them as good as we can for the small amount of cost to get them to you. Yeah once you get them installed they look great.
Shadow1100Guy
12-13-2005, 12:35 PM
I've gotta say, these speedo faces are awsome looking once they are installed! They don't look very good until they are in but when you get it behind the glass and turn on your lights...... WOW! What a GREAT MOD!


Pegsishappywithhis!

Hey if you have one of our dials on your bike can you send me a pic of it on your bike PLEASE!

send it here: custombikerstuff@gmail.com
Kelley
12-13-2005, 01:01 PM
The pic for the '05 750 Spirit matches my paint exactly! I may have to do this... I'm just wondering if flames on the tank and flames on the speedometer may be too many flames... hmmm...
pegscraper
12-13-2005, 01:01 PM
Hey if you have one of our dials on your bike can you send me a pic of it on your bike PLEASE!

send it here: custombikerstuff@gmail.com
My wife has the camera today but I will get a picture of it tomorrow and send it to you. Just a FYI. PUSH the needle stop out. Don't pull it or it might break (like mine did). I replaced it with a piece of wire and it looks fine.

Pegs
Shadow1100Guy
12-13-2005, 01:26 PM
My wife has the camera today but I will get a picture of it tomorrow and send it to you. Just a FYI. PUSH the needle stop out. Don't pull it or it might break (like mine did). I replaced it with a piece of wire and it looks fine.

Pegs

thanks. I look forward in getting the pic from you.
Shadow1100Guy
12-13-2005, 01:28 PM
The pic for the '05 750 Spirit matches my paint exactly! I may have to do this... I'm just wondering if flames on the tank and flames on the speedometer may be too many flames... hmmm...

I personaly think that if you have flames on your bike that going to something new is always cool. but many folks want the same flames and it does work.
Kelley
12-13-2005, 01:55 PM
I personaly think that if you have flames on your bike that going to something new is always cool. but many folks want the same flames and it does work.
That's what I'm thinkin'. I didn't realize at first that there were other design options. I looked through the site more throughly now. So, I can come up with any background pic??? That would be pretty cool...
Wild Coyote
12-13-2005, 05:15 PM
My wife has the camera today but I will get a picture of it tomorrow and send it to you. Just a FYI. PUSH the needle stop out. Don't pull it or it might break (like mine did). I replaced it with a piece of wire and it looks fine.

Pegs

Push it out???? Do you pop the speedo dial off first then flip it over to pop it out? I'm doing mine but haven't got that far yet. Still waiting for my new speedo face to show up. I have it all apart, but haven't pulled the dial or stop yet.
pegscraper
12-13-2005, 06:14 PM
Push it out???? Do you pop the speedo dial off first then flip it over to pop it out? I'm doing mine but haven't got that far yet. Still waiting for my new speedo face to show up. I have it all apart, but haven't pulled the dial or stop yet.
Yes, you have to remove the faceplate and push from the back side. I tried to pull the stop out with needle nose pliers and it broke. It's just plastic and very small so it is very fragile. If you push it from the backside, it will pop out without breaking. Make sure you cover your channel locks with something thick and soft before you pinch the case back shut or you will leave marks on the front of the chrome ring. I have one mark but it is not noticable unless you get at the right angle.Good luck! (Its easy)Pegs
Wild Coyote
12-13-2005, 09:39 PM
Thanks for the heads up on the push thing.

Now Chuck, where is my speedo face? I was expecting it today. No packages today. Did you ship it out?
Shadow1100Guy
12-14-2005, 03:03 PM
Thanks for the heads up on the push thing.

Now Chuck, where is my speedo face? I was expecting it today. No packages today. Did you ship it out?

Yeah some left and some didnt. Not sure which one yours is. We had a theft of a batch of dials so some folks will have to wait for a few more days. We have to remake the whole batch of dials that were stolen. Sorry. But we did send out a big batch on the 11th and 12th yours may be in that one.
Wild Coyote
12-29-2005, 10:36 AM
I'm going to have a couple of extra flame dials if anyone is interested. Chuck made three for me trying to get the red flames right. I haven't seen the latest one yet but I will have the orange flame ones if anyone wants to use it, let me know. We can work something out $$ or trade.