i need your opinion

[cjones]

i am kinda torn on what to do about my rear lights. so i found these just not sure of the size they are 4x4 inches. seems a little big to me but i will only have two lights instead of 3 the style is right what i am looking for but the size has me questioning it

http://cgi.ebay.com/ebaymotors/Maltese-Cross-Taillight-Light-Set-Truck-Trailer-or-Rod_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el1262QQhashZitem170273586367QQitemZ170273586367QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[Titanium2006]

4x4 is damn huge for turns man....I think they might be a little big....good for a trailer maybe, but too big for a bike I think...

[cjones]

they would be running, brake and turns but yeah they are big just cant find any smaller

[Titanium2006]

just checked a place I look at lots...they have smaller...but pricey...at least you know they are out there....

https://www.dreamcycles.net/products/details.asp?PAGE=CAT&CATEGORY_ID=7&MAKE_ID=0&MODEL_ID=7&PRODUCT_ID=1588

[shadow247]

Would look good frenched into a fender, but would stick out like a sore thumb mount on the fender or some other place.

http://cgi.ebay.com/ebaymotors/2-CHROM-LED-RED-Turn-Signal-lights-Motorcycle_W0QQitemZ250408170377QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item250408170377&_trksid=p4506.c0.m245&_trkparms=72%3A1171|65%3A12|39%3A1|240%3A1318


I like these!!

[cjones]

one of the reasons i was looking at the bigger one i was planning on a side mount plate the bigger one is clear on bottom for the tag then i was the set and thought i could eliminate my turns plus i like the mount on the back not on the side like the drag specialties ones..................why can we never find the best of both worlds

[chizuck]

Would look good frenched into a fender, but would stick out like a sore thumb mount on the fender or some other place.

http://cgi.ebay.com/ebaymotors/2-CHROM-LED-RED-Turn-Signal-lights-Motorcycle_W0QQitemZ250408170377QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item250408170377&_trksid=p4506.c0.m245&_trkparms=72%3A1171|65%3A12|39%3A1|240%3A1318


I like these!!
Those are good lights. I run the tear drop style ones. hear is the link to who makes them. http://www.harrisonspecialties.com/mm5/merchant.mvc

[cjones]

here is what it would look like mounted but picture on on each side
http://i256.photobucket.com/albums/hh166/cjones519/4d56b7c4-321a-402d-bd48-2811f5b349f.jpg

[Beaker]

Dude, IMHO, #1. Two of them would be too much. It WOULD look like a trailer. #2. The Maltese Cross is WAY over done (you'll look like another bolt-on poser). Again, IMHO, slow down, find something that works with the look of your bike, and take the time to mod it to fit. There's lots of stuff out there that will look cool and do the job. Again, JMO.

[cjones]

well beak for me it was the crosses or this

http://cgi.ebay.com/ebaymotors/LED-Motorcycle-Taillight-3-D-Skull-Cateye-Brand-New_W0QQitemZ380116659474QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item380116659474&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

may still do the cross but just one i am really going for the old school look may just not run turns

[Beaker]

Maybe just do one for a brake, and mini bullets or something for turns. I'm just saying that two would be too much.

[cjones]

yeah thats what i figured but everyone around here just says yeah that will look good go for it so i figured i would ask you guys cause we all know how brutally honest you guys are