new pics posted

[morpheus]

ok brothers almost done with my mods with the exception of my passenger pegs which i'll pick up next weekend so i thought i'd post some current pics.ALL advice and comments welcome.sent the whole frontend down to Billski and had him polish the forks,rotor,cailper.risers and triple trees(thanks Bill)(i'm just not able to do it with a rebuilt shoulder)added the warheads.also added some chrome cable guides. had some custom caps made for the fork nuts and the steering stem nut along with rear axel nuts(thanks to my brother from the north Bracketman)front caps manufactured by local craftsman(thanks Joe).seat was sent back to Slitherin(who orginally slammed it for me)and saddleman gel pad was inserted(thanks again John;hope to meet ya this summer @ Gettysburgh).forward controls were removed and repolished by me; blue led lights added to engine area for nite riding.also changed the rear tire to a metzler 180.still have to add inspection plate to front end but it's definatly not going on the forks.and finally cut some 1/8 alumium plates for the side covers to cover the honda emblem;smoothed the edges and polished them to a chrome finish and applied with two-side automotive stick tape(when you look at them its almost a 3d effect

[Beaker]

Nice lookin' scoot, Morph!:thumbsup:

[Gaylord]

Looks good .Where did you get tack?

[firefighter212]

looks awesome there Morph!!!!!!!!!It doesn`t take long for the brake pads to ugly up those nice shinny rotors,does it?I only rolled mine around in the garage and already has scratches.Love those fork spikes!!!

[morpheus]

looks awesome there Morph!!!!!!!!!It doesn`t take long for the brake pads to ugly up those nice shinny rotors,does it?I only rolled mine around in the garage and already has scratches.Love those fork spikes!!!
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
just from takin a qiuck ride in the lot after it was all reassembled

[morpheus]

Looks good .Where did you get tack?


BARRONS

[Farther]

Nice clean look, very sweet!!

[joemcglaughlin]

great looking bike nice "n" clean looking

[lowboy]

Like the fork caps.
Where did you get them?
Did you have to mod them to fit?

[morpheus]

Like the fork caps.
Where did you get them?
Did you have to mod them to fit?


!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
had some custom caps made for the fork nuts and the steering stem nut along with rear axel nuts(thanks to my brother from the north Bracketman)

they wern't cheap-but they add alot of bling!!!

http://www3.sympatico.ca/peter.mcavoy/bman/Bman.html

peter.mcavoy@sympatico.ca

tell him morpheus sent ya-hes got the pattern and measurements

[ShadowMonster]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
had some custom caps made for the fork nuts and the steering stem nut along with rear axel nuts(thanks to my brother from the north Bracketman)

they wern't cheap-but they add alot of bling!!!

http://www3.sympatico.ca/peter.mcavoy/bman/Bman.html

peter.mcavoy@sympatico.ca

tell him morpheus sent ya-hes got the pattern and measurements

They look great Morhpeus, nice to see a home town Canadian vendor providing parts, I'm tired of getting raped by UPS on brokerage fees, I'll be bookmarking Bracketmans site for future purchases, thx!!

[mcvierh]

Yeah Man! I see why you want those Mapam (or the like) passenger pegs, them stock sure are ugly......that little strip of plate you were talking about, did you cover the "honda on the side covers? if so that honda side cover sticker just peels right off leaving a nice smooth surface.

[Raymo]

I was wondering about that myself, mine peeled right off.

[~cruisin~]

I was curious about that as well

[YO MUDA]

Man that sucker shines, looks great.:thumbsup:

[balloonot]

looks awesome Morph. great job.

[Beaker]

Yeah Man! I see why you want those Mapam (or the like) passenger pegs, them stock sure are ugly......that little strip of plate you were talking about, did you cover the "honda on the side covers? if so that honda side cover sticker just peels right off leaving a nice smooth surface.

Yep. 20 seconds with my wife's hair dryer and a little WD40 to wipe off the residue. Or, wait, was that last Wednesday morning's adventure? Damn Alzheimer's!

[craigv318]

Show and Shine!!!!
I think i need shades!!!

Looks sweet. Great job,

Is there anything else you have your looking at doing??

[desperado]

Hey now that thing shines! Wow going to need shades around you when the sun does ever come back out!

[desperado]

Where did you get the down tube spikes?

[morpheus]

Yeah Man! I see why you want those Mapam (or the like) passenger pegs, them stock sure are ugly......that little strip of plate you were talking about, did you cover the "honda on the side covers? if so that honda side cover sticker just peels right off leaving a nice smooth surface.


YEA I TOOK THE STICKER OFF BUT ALSO WANTED SOMETHING TO ADD DEPTH TO THAT PLAIN OLD SIDE COVER-must say they did turn out nice;pics dont do them justice

[zaniricci]

WOW!!! That bike looks GREAT!! I would love to see it in the sun. Nice Job!:thumbsup: :thumbsup: :thumbsup: :thumbsup: